Seatposts

Ride longer, ride farther with the eeSilk Carbon premium suspension seatpost. The eeSilk carbon is comparable in weight to traditional rigid performance seatposts while offering 20mm of vertical compliance improving control on rough surfaces and reducing fatigue on long rides. These posts make great enhancements to endurance road bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 20mm - Length: 350mm - Weight: 295g (eeSilk Carbon 27.2) - Max Rider Weight: 250 lbs. - Offset: 8mm

Performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. These posts make great enhancements to gravel or mixed surface bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 35mm - Length: 362mm - Weight: 323g (27.2mm), 333g (31.6mm) - Max Rider Weight: 250lbs - Offset: 12mm - Minimum Extension: 80mm - Maximum Extension: 287mm

Get the DownLow. Our DownLow dropper post is an infinitely adjustable, easily serviceable, air/hydraulic unit with a sweet cable remote. It goes up. It goes down. You need one. Where it thrives: Challenging trails, up and down hills What it's built for: Handling, confidence Highlights: - 31.6 diameter - Alloy construction with slot key bushings and wiper seals - Preset airspring for no-fuss setup

The Transfer rises again with a full redesign, making it smoother and more robust than ever before. With easier actuation, enhanced serviceability and greater tunability, the 2025 Transfer gets an overall edge over the competition. Now travel adjustable in 5mm increments and available up to 240mm of drop. The best-of-the-best technology is available in the Factory Series models, featuring buttery smooth, ultra durable Genuine Kashima Coat. - Fully redesigned hydraulics of the 2025 Transfer feature an entirely new sealing system for enhanced durability. The full-service interval is now at 300 hours, which most riders can do with the tools in their garage - Metal-backed EKONOL (PTFE/Teflon) bushings to achieve tight tolerances and the lowest possible friction to allow easier actuation - The placement of the new air chamber allows riders to recharge and adjust air pressure through a Schrader valve under the seat clamps. Tune to your preferred return speed or adjust for environmental factors such as altitude or ambient air temperature. A metal valve cap with O-ring (the same we use on FOX suspension) ensures zero air leaks through the valve - Low stack height and 2-bolt clamp design that riders loved from the previous Transfer, while improving aesthetics and keeping weight to a minimum - Wider range of options, with up to 240mm of drop, and adjustable travel (up to 25mm in 5mm increments) - Cable actuated with tool-free quick disconnect for easier installation and removal, low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Remote lever sold separately

The Transfer rises again with a full redesign, making it smoother and more robust than ever before. With easier actuation, enhanced serviceability and greater tunability, the 2025 Transfer gets an overall edge over the competition. Now travel adjustable in 5mm increments and available up to 240mm of drop. The best-of-the-best technology is available in the Factory Series models, featuring buttery smooth, ultra durable Genuine Kashima Coat. - Fully redesigned hydraulics of the 2025 Transfer feature an entirely new sealing system for enhanced durability. The full-service interval is now at 300 hours, which most riders can do with the tools in their garage - Metal-backed EKONOL (PTFE/Teflon) bushings to achieve tight tolerances and the lowest possible friction to allow easier actuation - The placement of the new air chamber allows riders to recharge and adjust air pressure through a Schrader valve under the seat clamps. Tune to your preferred return speed or adjust for environmental factors such as altitude or ambient air temperature. A metal valve cap with O-ring (the same we use on FOX suspension) ensures zero air leaks through the valve - Low stack height and 2-bolt clamp design that riders loved from the previous Transfer, while improving aesthetics and keeping weight to a minimum - Wider range of options, with up to 240mm of drop, and adjustable travel (up to 25mm in 5mm increments) - Cable actuated with tool-free quick disconnect for easier installation and removal, low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Remote lever sold separately

Saddle Up Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height and a 25g weight savings from the previous version. This post will treat you right. Less is More New, patent-pending FOX seat clamp design dramatically reduces stack height, allowing you to fit more travel into a shorter space. Full Coverage Proven FOX-designed internals provide infinite height adjustment, but perhaps more importantly—even easier serviceability. No-Sweat Installation Mounting a saddle and getting your saddle position dialed is easy thanks to the user-friendly seatpost clamp. Brilliantly Uncomplicated Uses standard shifter cable and housing. You know, just to keep things real. Oh yeah—it's also 25g lighter than the previous version. - Compatible with Matchmaker - Includes post only - Mechanical lever actuation - Head Type: Zero Offset—2 Bolt - Weight: 520g

- Up to 200mm of vertical travel adjustability with limitless positioning - Tool-free adjustable travel design which let you adjust the travel by 5mm increment depending of rider's preference - Internal cable routing only - Clamp design compatible with standard 7mm (alloy) or 9mm (carbon) saddle rails - Includes 1x remote lever Travel option: - 95-120mm - 120-150mm - 140-170mm - 170-200mm

The minimal design of the ShockStop Seatpost blends seamlessly with the aesthetic of modern gravel, road, and e-bikes. Along with the ShockStop Stem, this system works together to reduce fatigue and strain, letting you ride further, faster, and more comfortably. Benefits: - Go further—reducing fatigue from bumps and vibrations - Ride faster—energy that is normally wasted suspending your body is converted into forward motion - Take control—customize your suspension feel to float over obstacles and maintain control Details: - 35mm of active suspension travel - Infinitely adjustable stiffness via pre-load adjustment and swappable springs - Adjusting stiffness / pre-load does not reduce travel - Swappable springs included to accommodate varied rider weight and preference - Optimized linkage geometry provides ultra-responsive suspension feel - Check technical specifications for compatibility What's in the Box: - 1 x ShockStop Seatpost - 2 x springs (1 pre-installed, 1 included in box for increased stiffness) - All required hardware

Full UD carbon shaft with alloy clamp - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - Available in 0mm and 15mm setback options - ISO-Mountain safety certified

Take the edge off. The SAVE Carbon seatpost has been proven in the worlds most challenging bike races. Light, comfortable and incredibly functional. Where it thrives: The open road, up and down hills What it's built for: Comfort, control Highlights: - Ultralight carbon - Subtle compliance = comfort - Di2 internal battery compatible

The XC companion. Everything a full-carbon XC seatpost should be, light, strong and incredibly functional. Where it thrives: Up and down hills, challenging trails What it's built for: Stability, lightweight, compatibility Highlights: - Compatible with round, oval, and both metal and carbon rails - 190g, 31.6 diameter, 0 degree offset - Reflective rear decal

Ride longer, ride farther with the eeSilk premium suspension seatpost. The eeSilk is comparable in weight to traditional rigid performance seatposts while offering 20mm of vertical compliance improving control on rough surfaces and reducing fatigue on long rides. These posts make great enhancements to endurance road bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately. - Travel: 20mm - Length: 375mm - Weight: 345g (eeSilk 27.2) - Max Rider Weight: 250 lbs. - Offset: 8mm

Performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. These posts make great enhancements to gravel or mixed surface bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 35mm - Length: 387mm - Weight: 373g (27.2mm); 378g (31.6mm) - Max Rider Weight: 250lbs - Offset: 12mm - Minimum Extension: 80mm - Maximum Extension: 287mm

Included spacers provide travel adjustability in 3, 4, 5 or 10mm increments, Integrated storage channel to store backup adjustment spacers clean and neatly in place, Reduced chassis and insertion length on 100mm and 150mm travel posts for smaller frame sizes, Rotatable cable actuator for smooth cable routing and performance, Reduced collar height for even more drop, Redesigned ergonomic thumb control lever compatible with 1x control system, Lighter weight than previous model, Easily serviced with replaceable cartridge technology

The K-Force Light SB25 post's one-piece carbon fiber shaft and head are topped off with a forged alloy Minimal Top Clamp, giving a full range of adjustment and secure saddle mounting at a very low weight. There's also the option of mounting a Shimano Di2 battery in the bottom of the post. - Forged alloy Minimal Top Clamp (MTC) - One-piece continuous carbon fiber construction - Fit 7mm standard rails and 7x9mm oval rails - Weight: 204 grams

- Giant Variant carbon seatpost - Fits 2016+ TCR Advanced models (non-ISP)

The latest generation Thudbuster LT is superior to its predecessor in every way.  Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. - Travel: 90mm - Weight: 750g (31.6mm) - Max Rider Weight: 250lbs

The latest generation Thudbuster ST is superior to its predecessor in every way. Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, and additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. - Travel: 50mm - Weight: 580g - Max Rider Weight: 330lbs

Features - Anti-Twist Technology keeps the saddle firmly positioned - Steel proprietary air & oil cartridge offers smooth consistent load range adjustment - Internal cable routing - Secure 2-bolt clamp design with steel hardware - Clamp design compatible with standard 7mm (alloy) or 9mm (composite) saddle rails - Extra-long lower saddle rail guide designed to cradle lightweight saddle rails securely - Includes updated 2x remote lever

- Replacement seatpost for all 2009-2014 non ISP TCR, Defy, and Avail Composite, Advanced and Advanced SL bikes - 25 or -5mm offset without any additional parts

The newly redesigned EC70 Seatpost takes our superlight unidirectional carbon and applies our patent pending ISA technology - Independent Saddle Adjustment - which allows for completely independent fore-aft adjustment and saddle adjustment. With the 2 pitch adjustment bolts, the saddle angle gets locked into place as if you were adjusting limit screws, and unlike single bolt designs, you get adjustability and security. Available in 20mm Setback and Zero configurations. - Finish: Matte Black UD Carbon/Matte Black Head - Weight: Zero offset, 210g; Setback offset, 223g - Head offset: 0mm; 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Rail clamps: 7mm round; 7mm x 9mm oval (both included) - Material: EC70 carbon

Unleash your ride with the BumpStop seat post. Designed to unlock adventure in your ride with 50mm of active suspension absorbs the affects of bumps, rocks and whatever you run over for a more enjoyable ride. 50mm of active suspension lets you ride further with more comfort. Adjustable preload lets you customize the suspension stiffness to match your needs. - Suitable for up to 300lbs. - Set preload for desired compression. - Comes with neoprene dirt cover - Tube and Tool Wrap not included

A specific eTen hydraulic cartridge with single bolt offset saddle clamp allow the enjoyment of droppers at a low price, available with 100mm of travel. - Black hard anodized stanchion and an air spring, hydraulically locked cartridge - Single-bolt alloy head - Remote sold separately

- UD carbon shaft bonded to an AL6061-T6 alloy top clamp - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - ISO-Mountain safety certified

FSA's Afterburner is a tough, lightweight seatpost that works great on road and mountain bikes. Its 1-piece 3D-forged aluminum construction makes it strong and stable while remaining light. And, it's super easy to adjust thanks to the convenient 2-bolt clamp.

- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)

3D forged one-piece AL7050-T6 construction - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - 15mm setback - ISO-Mountain safety certified

The proven 2-bolt design on this classic provides a class-leading balance between strength, weight, and adjustability. The two-bolt design is easy to adjust and holds tight. Its low profile clamp reduces stress on lightweight rails and won't bottom out, and the bolts are oriented to the axis of the rails for the greatest contact area with the saddle. The Classic also features Ritchey's 'Classic' high-polish silver finish. - Material: 2014 alloy - Total length: 350mm (including 100mm of minimum insert) - Saddle clamp: standard - Saddle clamp torque: 13Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 260g (27.2x350mm) - Color: high-polish silver

- 6061-T6 construction w/forged alloy head - 45mm adjustable preload suspension travel - 2-Bolt Zero Offset head clamp - Up to 300 lb rider weight - EN MTN safety approval - 385g (27.2mm x 350mm)

Proven 2-bolt design provides a class-leading balance between strength, weight, and easy adjustability. Low-profile clamp reduces stress on lightweight rails and won't bottom out. - Material: 6061 alloy - Saddle clamp: standard - Saddle clamp torque: 13Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification