Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pumps/Inflation

XLAB X-Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
Vittoria Pit Stop Tire Sealant
$14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
TwoFish Twofish Bikeblock Inflator Holder
$7.90
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Topeak HybridRocket HP
$59.95
Topeak makes it easy to fill your tires with the HybridRocket HP pump. This innovative little ride-saver is a CO2 inflator on one side and a standard pump on the other. It also boasts aluminum construction for superb durability and max pump power. Its small size easily fits into a jersey pocket and with a capacity of 160 psi you'll have no problem getting rolling again. The HybridRocket's extendable hose with SmartHead fits both Presta and Schrader valves and lets you pump from a more comfortable angle, lessening chances of valve breakage.
Topeak JoeBlow Max HP Floor Pump
$39.95
Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.
Topeak Joeblow Mountain X
$69.95
This unique mountain bike specific floor pump features a super-sized barrel that inflates tubes nearly 50% faster than normal floor pumps. It delivers the higher volume required for large off-road tires. The extra-sensitive 3" easy-to-read low pressure analog gauge helps dial in the proper pressure while the large steel base provides stability. - TwinHead DX5 works with Presta, Schrader, and Dunlop valves - Oversize padded handle - Barrel/Base: Painted steel - Gauge: 60psi / 4bar, 3” middle mount analog - Volume Per Stroke: 722 cc - Added Features: Attachments for inflating sports balls and bladder heads, Hose dock - Size: 72 x 26.6 x 14.2cm / 28.3” x 9.1” x 6.7” - Weight: 2.3kg / 5.07lb
Topeak Mini Dual
$18.95
Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.
Topeak Mini Dual DX
$24.95
Topeak's Mini Dual DX is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, their thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves.
Topeak Pressure-Rite Schrader Valve Adapter
$19.95
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
No Image
$39.95
This mini sized gauge can be attached between the pump and valve to read pressures while pumping or used alone. Provides pressure readings up to 160 psi / 11 bar. Rotating gauge is easy to read and the head works with Presta, Schrader or Dunlop valves on bikes / motorcycles / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. An air release button allows fine tuning of pressure. - Pump Head Compatibility: Presta / Schrader pumps - Tire Valve Compatibility: Presta / Schrader / Dunlop valves - Gauge: Reads 160psi / 11 bar, 1-1/2" analog - Pressure Tuning: Air release button - Material: Engineering grade polymer / aluminum - 360 degree rotatable gauge, Dust cap - Size: 6.2 x 5.8 x 3cm / 2.4" x 2.3" x 1.2" - Weight: 50g / 1.76oz
Topeak SmartGauge D2
$39.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Syncros FP 1.0 Floor Pump
$89.99
The FP 1.0 Floor Pump is precision crafted from high-grade aluminum to produce a lightweight, functional pump for daily use. The ergonomic, wide handle provides the needed leverage to inflate tires quickly and with ease, while the dual-valve Presta and Schrader screw-on T-head and three-inch dial allow for accurate inflation of a variety of tires.
Syncros FP2.0 Floor Pump
$69.99
The FP2.0 Floor Pump is precision crafted from high-grade aluminum to produce a lightweight, functional pump for daily use. The ergonomic, aluminum handle designed into a delta shape provides the needed leverage to inflate tires quickly and with ease. While the head fits both Presta and Schrader, a three inch dial allows for accurate inflation of all tires you may encounter. - Ergonomic composite handle with integrated head mount - Top mounted 2.5" gauge with air bleeding button - Wide and stable steel base - Auto Head Presta/Schrader - 160PSI / 11 Bar - Dimensions: 66cm - Air volume per stroke: 360CC
Syncros HP2.0 Mini-Pump
$19.99
The HP2.0 Pump is a high-pressure-specific model designed to inflate tires to 130 PSI in short order. The pump comes equipped with a retractable hose and a screw-on head to fit Presta valves. - Aluminium, composite handle and outer sleeve - Valve Type = Screw-on T-Head Presta - Maximum Pressure = 130PSI / 9 bar - Light construction - Handy outer sleeve - Locking handle - Air volume/stroke = 24cc - Dimensions: 19cm - 130PSI / 9 ba - Weight: 86g
Syncros HV Micro-Floor Pump
$54.99
The Syncros HV Micro-Floor is midway between a workshop floor pump and a mini-pump. It can easily fit in All-Mountain backpack to suit any MTB rides while you will always have a free space in your hand luggage to fit the Micro-Floor pump to be sure you don't go on a road training weekend without it. It comes with a reversible valve to fit both Presta and Schrader valves. - A travel floor pump with a stowable foot pad - Backpack-friendly size - Extra long hose for easy trail-side inflation - Floor pump construction offers the best inflation performance for high-volume and high-pressure tires - Single, simplified storage for the head and hose
Syncros Vernon 2.0 Dual Mode Floor Pump
$99.99
The first pump offering function and accuracy at low and high pressures. With its two air chambers, our Vernon 2.0 Dual Floor Pump is the ideal pump for riders with multiple bikes. Simply flip the gauge to your preferred discipline. In MTB mode the pump delivers a high volume of air with a gauge that is calibrated to show up to 40PSI / 2.8 BAR to allow for accurate pressure. In Road mode, a second chamber is engaged to provide air at high pressure. In this mode, you can reach 160PSI / 11 BAR. The gauge is positioned beside the ergonomic handle to allow for easy reading of the desired pressure. - Steel barrel and base, composite handle with bleed button - Valve Type: Flip head Presta/Schrader, with sealing lever - Maximum Pressure: High volume / MTB = 40PSI, High pressure / ROAD = 160PSI - The first pump with 2 modes optimized to inflate road and mountain bike tires - Dual face gauge, 40PSI/2.8Bar for Mountain bikes, 160PSI/11Bar for road bikes - Flipping the gauge face activates the bigger or smaller pump barrels to reach high volume for mountain bikes tires or high pressure for road tires - Integrated handle with head dock for locking and protection - Reversible head with integrated air bleeding button - Wide and stable steel base - Flippable gauge for high volume MTB or high-pressure Road delivery. - Dimensions: 675mm - Air Volume Per Stroke: High volume / MTB = 784cc, High pressure / ROAD = 327cc
Silca Hiro Side-Lever Locking Disc Chuck
$70.00
Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.
Serfas 12-Gram CO2 Non-Threaded Cartridges
$10.00
These compact, non-threaded 12-gram cartridges work with compatible CO2 inflators and pack easily into your seat bag.
Serfas 16 Gram CO2 Threaded Cartridges
$17.00
High-quality, compact, and easy-to-use CO2 cartridges. - 16 Gram Threaded Cartridge - Fits All CO² Pumps That Accept 16G Threaded - Small, Compact, Easy To Use - 1 Box / 20 Cartridge Count Capacity Dependent On Tire Size: - 29×2.0—31 PSI - 26×1.95—40 PSI - 700x23c—130 PSI - 700x28c—86 PSI - 20×2.0—48 PSI - 24×2.0—42 PSI
Serfas 16-Gram CO2 Non-Threaded Cartridges
$10.00
These compact, non-threaded 16-gram cartridges work compatible CO2 inflators and pack easily into your seat bag.
Serfas 16-Gram CO2 Threaded Cartridges
$12.00
These compact, threaded 16-gram cartridges work with compatible CO2 inflators and easily packs into your seat bag.
Serfas AF-1 Air Force One Air Canister
$70.00
Quickly and easily seats the bead for tubeless tires with the massive air quantity and pressure provided by the Air Force One air canister! Features: - SEATS THE BEAD FOR TUBELESS TIRES - Replaces Need For Air Compressor - Portable & Easy To Use - Works With All Tubeless Tires - Inflates With Floor Pump To A Max PSI Of 160 - Blow Off Valve Protects Canister From Over Inflation - Dual Valve Head Fits Presta & Schrader Valves Specs: - Capacity: 160PSI - Weight: 2,313g - Height: 20.25in
Serfas Combo Kit 1
$40.00
Serfas has the basics covered with the Combo Kit 1. It comes with dual valve mini pump, a 6-piece mini tool, a set of tire levers, an 8-piece tire patch kit, and a medium sized saddle bag to carry it all.
Serfas Combo Kit with Floor & Mini Pump
$70.00
Gear up with the CK-6 Combo Kit, featuring the Serfas FP-35 Floor Pump & compact Mini Pump. It's the perfect starter kit for inflating your tires and changing flats on the road. Includes: - FP-35 Floor Pump - Mini Pump - 6 Piece Mini Tool - 2 Tire Levers - Medium Saddle Bag - Ballistic Nylon Bottle Cage
Serfas Combo Kit with Mini Pump
$45.00
Gear up with the CK-7 Combo Kit with compact Mini Pump. Toss a spare tube in the saddle bag and you've got everything you need to changes flats on the road. Includes: - Mini Pump - 6 Piece Mini Tool - 2 Tire Levers - Medium Saddle Bag - Ballistic Nylon Bottle Cage
Serfas Digital Shock & Tire Pump
$95.00
Features: - First of its kind digital mini pump for tires and MTB shocks - Telescoping handle effortlessly switches between high pressure & high volume - Presta & Schrader valve compatibility - Digital gauge reads from 5 PSI to 300 PSI with +/- 1% accuracy - Micro adjust button allows for fine tuning of air pressure - Foldable hose allows for easy usage and storage Specs - Capacity: 300 Psi - Length: Open: 23-3/4" Closed: 11-3/4” - Weight: 282 Grams
Serfas FMP-500 Floor Pump
$85.00
Quick and powerful, Serfas' FMP-500 Floor Pump inflates tires to the right pressure in no time. Its solid aluminum base keeps it firmly on the floor while the aluminum barrel, ergonomic handle and stainless-steel hose ensure excellent air transfer. Inflation is easy thanks to a valve head that fits Presta and Schrader valves, a built-in gauge, and an air-release valve so you can dial in the perfect pressure. The FMP-500 also includes tips for inflating balls and other accessories, too.
Serfas FP-200 Pump Digital Gauge
$25.00
The FP-200 digital gauge allows you to convert your Serfas floor pump to digital, or replace a worn out digital gauge. It's compatible with all FPD-200 and FP-200's, with the exception of WFP-200 and FP-200BK.
Serfas FP-T1BK AIR FORCE TIER ONE Floor Pump
$30.00
Air Force Tier One floor pump Features: - Ergonomic Polymer Handle - 2" Analog Pressure Gauge (PSI/BAR) - Simple Valve Head (Presta/Schrader) - Integrated Hose Keeper - Steel Pump Barrel and Thermo Carbon Base Specs: - Color: Black w/ White Graphics - Capacity: 160 PSI - Weight: 998 Grams - Height: 25 1/4"
Serfas FP-T2 AIR FORCE TIER TWO Floor Pump
$40.00
Air Force Tier Two floor pump - Ergonomic Handle - 2.5" Analog Pressure Gauge (PSI/BAR) - Simple Valve Smart Head (Presta/Schrader) - All Metal Barrel and Base - Integrated Hose Keeper - 28 1/2" Pump Height
Page 1 of 5 Next page