Filter By:
Hubs
$32.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling.
- Internal O-rings and grease sleeve
- High quality, sealed Cup & Cone Bearing
- High durability and smooth rolling for sustained performance
$144.99
Shimano Alfine Center Lock Dynamo Front Hub
- Compatible with 26 to 28-inch wheel sizes
- Light alloy QR lever and nut
- 6V, 3.0W output
- Centerlock rotor mount
- Spoke Interface: J-Bend
- Weight: 575g
$459.99
Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub.
- Center Lock Disc Rotor Compatible
$31.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts.
- Double contact sealing
- Super polished bearing races for low friction rolling
- 6-bolt ISO disc mounting surface
$57.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-less 15mm thru axle system optimizes rigidity and weight
- Simple setup and reliable trail performance
$45.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-free 15mm thru axle system is stiff and lightweight
- Simple setup and reliable trail performance
$179.99
Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, the XTR front hub is perfect for custom MTB wheel builds.
- Traditional flange
$90.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Fully convertible with tool-free end caps
- 24, 28 or 32 spoke holes
$225.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes
$219.99
- Tough on trail and light on price rated for everything from XC to Enduro and E-bike
- Steel axles cartridge bearings robust alloy hub shell and steel cassette body
- 10-degree pawl engagement
- International Standard 6-bolt disc mount
- *Shimano/SRAM
$89.99
- eMTB rated with steel axles
- 6902 cartridge bearings and robust 10 degree engagement
- 32h spoke count
- For J-Bend spokes only
$219.99
- An oversized hub shell increases torsional and lateral stiffness
- 6902 bearings for maximum durability
- Wide bearing placement was designed to decrease load on the bearings
- Low-drag labyrinth seals
- Tool-free endcaps
- Torque-cap compatible
- Includes standard 15mm end-caps only, Torque must be purchased separately
$379.99
At the Center of It All
Cast your eyes upon your new favorite component, the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery-fast speed by way of solid, smart design.
Power To The Pedal
Let's add it up: a 60-tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power.
Overbuilt But Not Overkill
With this hub, bigger is better. An oversized hub shell ads stiffness and stability while large and in-charge 6902 bearings perform for the long run.
$192.50
Paul Components WORD single-speed rear hubs are classic, reliable hubs with knurled end caps and Enduro cartridge bearings.
- Extra-wide flanges and bearing spaces
- Rear hub accepts BMX freewheels with English threads (1.37 x 24 tpi)
- Please note that radial lacing voids the manufacturer's warranty
- 7075 aluminum axle tube
- Adjustable bearing preload
$192.50
When we first introduced our Wacky One-Speed Rear Device (W.O.R.D.), it was the first purpose-built single speed mountain bike hub. That original hub not only set design standards that continue to this day, like a 52mm single speed chainline, it also proved that small American manufacturers could stand out in a market increasingly crowded by bigger overseas brands.
When designing this modern version of the WORD, we spread the flanges out as far as possible while leaving room for freewheel threading. This allows the WORD to be built up as a strong dishless wheel. Over the years we’ve also improved upon the original axle and bearing adjustment mechanism to produce a single speed hub that we’re proud to call one of our heritage
- 6061 Aluminum
- 200g
- Anodized or Polished
- Black or Silver
- Axle Spacing: 135mm
- Flange Diameter: 43m
- Center to Flange: 39.5mm
- Chainline: 52mm
- Spoke Holes 28, 32, or 36
- Freewheel threading English 1.37x24tpi
- Axle Bolt Torque 21 N·m
$162.00
These hubs are machined from three inch round bars of 6061 aluminum.
- High flanges builds a stiff, strong wheel
- The axle is ground from 7075 aluminum, which has a great strength to weight ratio
- Adjustable precision bearings
- Knurled stainless steel outer locknut faces
- 216g (inc bolts)
Dimensions:
Axle Spacing: 100mm
Flange Diameter: 65mm
Center to Flange: 32.5mm
$194.50
High flanges builds a stiff, strong wheel
- Hubshell is flip-flop version with fixed threading on one side and freewheel threading on the other
- Adjustable precision bearings
- Knurled stainless steel outer locknut faces
- Includes PAUL stainless lockring
- Bolt On axle
- 290g
Dimensions:
Axle Spacing: 120mm
Flange Diameter: 65mm
Center to Flange: 32.5mm
Fixed Chainline: 44mm
Freewheel Chainline: 48mm
$196.99
- Elite Series convertible cyclocross/gravel hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Use: Front Hub
- Bearing: Sealed
- Drilling: 28H
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- OLD: 100mm
J-Bend Spoke:
- PCD-L: 58mm
- PCD-R: 45mm
- LTF-L: 27.65mm
- LTF-R: 15.35mm
- CTF-L: 22.35mm
- CTF-R: 34.65mm
Straight Pull Spoke:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 31.4mm
- LTF-R: 19.6mm
- CTF-L: 18.6mm
- CTF-R: 30.4mm
$165.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
- Wt: 180g
J-Bend:
- PCD-L: 58mm
- PCD-R: 45mm
- LTF-L: 27.65mm
- LTF-R: 15.35mm
- CTF-L: 22.35mm
- CTF-R: 34.65mm
Straight Pull:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 31.4mm
- LTF-R: 19.6mm
- CTF-L: 18.6mm
- CTF-R: 30.4mm
$79.99
- Aluminum hub body
- Sealed bearings
- 6-bolt disc rotor mount
- 15mm (See MT-3100) or 20mm thru-axle
- 32 or 36-hole spoke drilling
$119.99 - $196.99
- Elite Series convertible road disc hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt and Center Lock disc brake rotor options
- Sealed bearings
- Material: AL6061
Straight Pull Spoke/6-Bolt Disc:
PCD-L: 36mm
PCD-R: 36mm
LTF-L: 27.75mm
LTF-R: 15.25mm
CTF-L: 22.25mm
CTF-R: 34.75mm
J-Bend Spoke/Centerlock Disc:
PCD-L: 45mm
PCD-R: 45mm
LTF-L: 27.25mm
LTF-R: 15.45mm
CTF-L: 22.75mm
CTF-R: 34.55mm
$249.99
- Elite Series road hubs
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- Sealed bearings
- Material: AL6061
- Brake Type: Rim
- OLD: 130mm
Straight Pull Spoke:
PCD-L: 32mm
PCD-R: 52.5mm
LTF-L: 27.7mm
LTF-R: 50.8mm
CTF-L: 37.45mm
CTF-R: 14.35mm
J-Bend Spoke:
PCD-L: 38.5mm
PCD-R: 50.6mm
LTF-L: 27.45mm
LTF-R: 49.05mm
CTF-L: 37.7mm
CTF-R: 16.1mm
$102.99
• Machined and forged alloy construction
• Sealed cartridge bearings
• Lightweight design
• 8/10-speed cassette
• 20, 24, 28, 32, and 36-hole spoke drilling
• Quick-release
• 130mm hub spacing
• Black or silver
$189.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec.
Same Clutch coaster hub you’ve come to love, but with a few upgrades.
Features:
- Maximum strength axle design
- Super-durable bearing arrangement throughout
- 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required.
- Super-durable drag mechanism design
- Crankflip ready
Improvements Over the Clutch V1:
- 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability
- Improved clutch engagement
- Improved manufacturing precision throughout
- More slack than the V1 hub
- All-new durable proprietary plastic spec for the removable hub guard
Specs:
- 36-hole, 2014-T6 aluminum shell
- 9T Driver
- Left or right hand drive
- 22 oz / 623g
Guard Options:
- Plastic hub guard included (but optional to use)
- Alloy hub guard also available
$69.99
The Vandero hub is back and better than ever. This new PRO version of the Vandero is a precision sealed hub with proven in-bound 3/8-inch axle bolts and two plastic guards.
Features:
- 7075-T6 aluminum hub shell
- 6903RS sealed cartridge ball bearings
- Precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life
- 17mm 7075-T6 aluminum axle with steel helicoil thread inserts
- 3/8-inch heat-treated chromoly axle bolts with 17mm wrench flats and a 6mm hex slot
- Weight: 11.2oz
- Replaceable plastic hub guards included
$240.00
Industry Nine Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools.
- From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards in Asheville, NC
- 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control
- Classic j-bend spoke interface
- Steel cartridge bearings are durable
- Easily serviced with no proprietary tools; Designed to keep you in the saddle and out of the service queue
$460.00 - $470.00
Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards.
- 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control
- 6 pawl, 6 phase
- 115 tooth drivering
- Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue
- Classic j-bend spoke interface
- Steel cartridge bearings are durable
$714.90
The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings.
The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.
$714.90
Aluminum rear hub for bicycle - 18P DBCL 24 holes, straightpull, black. Aluminum Campagnolo freehub body, black.
- Dimension: 12x142mm
Page 1 of 2
Next page