- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability
Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains
A range of sturdy, affordable cogs is an essential part of a single speeder's quiver. Origin-8's Single Speed Cog is available in 13, 14, 16 and 18T sizes is chrome plated to resist rust and increase longevity. It's designed for Shimano/SRAM style cassette bodies and is made with splined, hardened chromoly steel. Now you can easily tailor your gearing for the terrain.
Built for the demands of BMX racing, the MX66 single speed cassette cogs are compatible with SHIMANO MX70, MX66 BMX hubs as well as other SHIMANO-compatible hubs. - Single sprocket: 14/15/16/18T - Chain size: 1/2-inch x 3/32-inch - Speeds: Single - Single sprocket for FH-MX70
$11.99 - $14.99
- Special single gear design with chain tensioner - Revised tooth profile to prevent chain skip - MODEL NO: CS-S500 - SERIES: SHIMANO ALFINE S7000/S700 Series - Gear thickness (mm): 2.0 - Recommended chain: Super Narrow HG for 9-speed
Shimano Cassette Lockrings.
Shimano Cassette Lockrings
- Chromoly steel with black oxide finish - 1.37" x 24tpi right hand thread - Requires a cog lockring (sold separately) - Compatible with 1/8-inch chains
$21.39 - $25.29
• Easy-on, easy-off • Available in two chain widths and two colors • Available in six teeth sizes
A range of sturdy, affordable cogs is an essential part of a single speeder's quiver. Origin-8's Torq Lite Single Speed Cog is available in wide range of sizes so you can easily tailor your gearing for the terrain. It's designed for Shimano/SRAM style cassette bodies, features a wide, flex-free base, and is made from hardened chromoly steel.
- Cold-forged chromoly construction - 8 splines for removal - Oversize 3-pawl design - Heavy-duty use freewheel - 13T and 14T fit Flip-Flop hubs only - Speeds: Single - Width: 3/32"
Pair this cog with your Shimano-compatible rear hub, spacers and a lockring (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. Machined from heat-treated chromoly and then chrome plated, these seriously tough cogs are strong, shiny and they come in sizes from 13T to 22T so you can pick the perfect gear.
Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.
A range of sturdy, affordable cogs is an essential part of a fixie rider's quiver. Origin-8's Track Cog is available in a variety of sizes and is chrome plated to resist rust and increase longevity. Now you can easily tailor your ride for the terrain. And you can choose between 1/8 and 3/32-inch chain widths.
When it comes to adventurous riding, a wider gear range is often better. With 9 speed and a 11-42T range, the ADVENT cassette has the low gears you need to get up and the high gears to get back down. The steps between gears are optimized to give an even spread in gear ratios, reducing the need for double-shifting to find the right gear. - Machined aluminum large cog for reduced weight - Carbon steel cogs are continuously forged for strength and shifting accuracy - Compatible with standard freehub bodies - Surface Finish: ED Black / Anodized Black - Combination: 11-13-15-18-21-24-28-34-42
absoluteBLACK single speed cogs feature a unique tooth shape, narrow-wide profile, and perfect roundness. Crafted with CNC machined 7075 aluminum with an anodized finish for long-lasting construction. - Tooth design is wider and more "square-like" compared to other single speed cogs - The narrow-wide profile provides additional strength and offers greater chain retention - Compatible with 1X, 6, 7, 8, 9, 10, 11, and 12-speed chains - To utilize the narrow-wide feature, use a 9, 10, 11, or 12-speed chain - Not compatible with half-link chains - Compatible with Shimano HG cassette bodies
You've got to have the right ratio for the track, and Shimano's Dura-Ace cogs come in a range of tooth counts so you can always be prepared. Manufactured from durable chromoly steel, each cog is machined to run perfectly straight.
Precision CNC CroMo construction - 9 Pawl/108 Point/3.33° Engagement for instant power transfer - 8 spline removal - Chrome plated
Shimano Deore M6000 Series 10-speed cassette. - Cogs: 11-13-15-17-19-21-24-28-32-36T
If you’re going to run just one gear it might as well be the very best you can get—a Chris King cog. Their stainless steel cogs are bead-blasted following heat-treating with sizes ranging from a leg-searing 14t through a sit-and-spin 20t. Compatible with Shimano/SRAM freehub bodies.
The GC line of cassette extender cogs allow you to modify your 10-speed cassette into a wide range cassette. To achieve the optimal shifting, the GCs are optimized for Shimano or SRAM cassette. Compatibility: - Compatible with SRAM 10-speed cassettes - Compatible with all 10 speed rear derailleurs and chains - Note that you may need a longer chain that you currently have on your bike - Chain stretch should be less than .5 when installing a new GC - Can be run in 2x configuration with a long cage rear derailleur - These fit very tight on certain Stan's No Tubes hubs like the 3.30 and the Easton X4 hubs. With a little filing and some grease they will go on.
- Extended range aluminum cog for those wanting 1x10 with a full range of gears - Only fits Shimano XT/XTR 11-36t (M771/M980) or SRAM X5/X7/X9/X0 11-36t 10sp cassettes (not compatible with 2011 and older SRAM derailleurs) - Requires removal of the 17T or 15T cog and spacer from existing cassette - Longer B-screw (sold separately) only needed for about 50% of Shimano derailleurs - May require a longer 10sp chain. Very tight fit on Stans 330 rear hub splines - Designed and manufactured in the USA from 7075-T6 aluminum alloy
The first kit to convert SRAM XD driver-equipped wheels for singlespeed use! Problem Solver's has a disproportionately large percentage of singlespeed enthusiasts in their ranks, so it’s only natural that when SRAM introduced a new freehub body in order to accommodate a larger number of gears, they started thinking about how to convert it to one gear. The Zinger provides chainline adjustability and a broad range of cog sizes for whatever type of bike you’re lookin’ to simplify.
Shimano's Ultegra 11-Speed Cassette delivers pro-level shifting and durability. The computer-designed tooth shapes and tough cogs mean you can shift quickly, precisely and smoothly even under pressure. Rider-tuned gearing options offer a range of cassettes to suit your riding style.
SRAM's 1070 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio, a lightweight aluminum lockring, and is available in myriad configurations to suit all your riding. There are even models with 36-tooth largest cogs for super-easy climbing.
- High-performance gear combinations provide superior rider choice - Hub body to fit a variety of bikes from MTB to road - Model Number: CS-HG800-11 - Series: Shimano - Average Weight: 335 grams
Full Pin technology uses eleven lightweight, stamped steel cogs held together with 123 high-strength stainless steel pins. The result: a cassette that’s light, durable and equipped with SRAM’s super wide 10-42T gear range that’s a perfect fit for any ride. The open design aids in mud clearance, giving you cleaner shifting performance and longer component life. • Super wide 10-42T gear range is a perfect fit for any ride • Optimized gear steps across entire range • XD driver body creates more stable hub connection
Featuring high performance and great durability, the K-Force has a large contact area to save alloy freehub bodies. - Heat-treated carbon steel cogs - Composite material spider - 11-speed cassette sprocket - Electroless Nickel plated cogs and anodized black Lock Ring and Spider - Cassette Body Type: Shimano/SRAM 11 Speed Road - Drivetrain Speeds: 11 - Color: Silver - Defined Color: Silver
- Rider Tuned Gearing - Wider Gear Combination: 11 – 28T/12 – 28T/11 – 30T (New Gear Combination) - Closer Gear Combination: 11 – 25T/12 – 25T - Lightweight - CFRP & Alloy Spider Arm, 5 Titanium Sprockets - Gear Combination: 11 – 25T, 11 – 28T, 11 – 30T (New Gear Combination), 12 – 25T, 12 – 28T
Featuring 10–24 gearing with two-tooth steps, the 7-speed XG-795 DH Cassette is optimized for the gear jumps that downhill riders want, eliminating the need for double or triple shifts. And because it’s so compact, it’s also light—the lightest cassette in existence, in fact, at just 136 grams. Compatible with any XD wheel, the Mini Block X-Dome technology integrates flawlessly with your SRAM 1X drivetrain. Going from zero to hero has never been faster.
Page 1 of 2 Next page